|
Post by gravelymay on Nov 12, 2008 9:54:27 GMT -5
Hi Repower with Honda , Kawasaki, Kohler, Robin . Briggs or any engine with a 1.00 dia Crank by using the Gravely 1.00 I.d. double Gear. Old Part # 46410 New part # 0864700 Any Questions my E-mail is gravelymay@yahoo.com Thanks Bruce g 5665 12 Hp Kohler 2 Wheel Gravely Repowered to 13 Hp Honda Repowered Gravely with hood up. Looking From the back. has all new controls on the Honda engine You Can :)see where the corner of the dash board was cut away to clear the air filter. Here the corner has been trimed off and the corner of the dash board to miss the air filter which has been turned backwards.
|
|
|
Post by Skools Out on Nov 12, 2008 11:19:19 GMT -5
Hey I just put you a step by step in the General Section for posting pictures, hope that helps. I just copied it from my other forum.
|
|
|
Post by gravelymay on Nov 12, 2008 20:02:06 GMT -5
Thanks skools out For the step by step directions. Works good. Here The muffler is cut out, there is probably a better way. Thanks Bruce g
|
|
|
Post by gravelymay on Nov 12, 2008 20:05:00 GMT -5
Hi This is the draw bar modification. Bruce g Check out the G.R.part # 008 alum spacer between the engine and the old Kohler adapter
|
|
|
Post by gravelymay on Nov 12, 2008 20:08:15 GMT -5
This is a assy Drawing picture to show the lay out of how the gears fit This is a 13.5 Robin with a conversion spacer adapter and gear Spacer made for 13 Hp.Honda This is a used 13.5 Robin that was bought off ebay for less then $200.00 to repower a 500 Gravely tractor Looks rough but runs good Here the Robin Engine is set up to be put on a 2 Wheel Gravely tractor using a Kohler adapter and Guthrie Repower spacer with the Gravely 1.00 I.D. gear and pilot bushing for 1.00 dia. Crank shaft.
|
|
|
Post by Skools Out on Nov 13, 2008 8:16:25 GMT -5
Hey that looks Great. I bet that 13.5 HP will do some real work.
|
|
|
Post by gravelymay on Nov 13, 2008 21:18:25 GMT -5
Hi The Honda has been in service about 1 1/2 years. It has 13 Hp Run out very strong and smooth. The 13.5 Robin has only been on about 1 Month. The guy said he was supprised at how smooth it is. Thanks Bruce g
|
|
|
Post by f147pu on Nov 25, 2008 0:26:11 GMT -5
I see you have the tires mounted with the tread pointing in opposite directions.....on purpose or "just for now"?
|
|
|
Post by gravelymay on Nov 25, 2008 18:29:47 GMT -5
Yep you got me. The tires where mounted the same so when we put them on The valve stem was in the way. They have been changed since the pic was taken. Bruce g
|
|
|
Post by gravelymay on Apr 17, 2010 22:03:23 GMT -5
Just a up date we also filled the tires with soft foam. The Tractor is in its 5 th season. with out any problems. We have help 13 different people Re power their walk behinds and so far all like them.
|
|
|
Post by gravelymay on Feb 13, 2011 15:08:06 GMT -5
Hi Guys Here is another step by step Repower Of a 5665 Gravely 2 Wheel tractor Great write up and good job on the tractor tinyurl.com/4jvm938Thanks Bruce g
|
|
|
Post by charioux on Dec 12, 2012 3:13:06 GMT -5
Hi everybody I must add that in the 90's in France two wheels were powered by Kawasaki or Honda The Kawa were 10hp or 12.5hp and the Honda was a 13hp
just for info A Mazet
|
|