|
Post by JRSTAS on Oct 12, 2020 13:41:39 GMT -5
Thank you in advance and here we go. So i was given a commercial 10a from family. I have gone through and checked all the wiring and replaced a few. The problem is I need to figure out what ignition switch I need now that the push button is gone. I have battery side of the solenoid going up to the switch and the energize for the solenoid. Need to bring regulators back to the switch and last they have a wire coming from the points and condenser to “ground them to shut off”. Any help or advice would be great it was running but had to pull the spark plug wire to shut it off.
|
|